The Bushfire Attack Level (BAL) rating is a critical assessment that categorizes the potential bushfire risk for properties in Australia, spanning from LOW to FZ, representing various levels of fire intensity and potential hazards.
To protect life and property, when building in a bushfire prone area, we are required to use certain building methods and materials to satisfy Australian Standard 3959:2018 – Construction of buildings in bushfire-prone areas.
These bushfire prone areas are given different bushfire attack levels (BAL) based on the heat flux exposure of the building in a bushfire situation.
When determining the BAL, it is always best to have a bushfire consultant carry out an assessment, and a professional assessment is likely to be required for any council submission or certification. If you are looking for an initial indication of the potential BAL to pursue your building project, you can complete a self-assessment. To do this, follow the steps below.
Step 1 – Determine the vegetation type
Use the classification of vegetation formations chart to determine the vegetation type.
Image source - NSW Rural Fire Service
Step 2 – Determine the distance from the proposed building to the bushfire hazard
Measure the distance between the proposed building to the bushfire hazard (shown in red)
Step 3 – Determine the slope (underneath the vegetation area)
Calculate the slope by using the formula below.
Tan-1 (rise/run) = Angle of slope
Example
Tan-1 (4/33) = 7° (upslope)
Step 4 – Determine the Forest Fire Danger Index (FFDI)
Use the table to find your FFDI value.
Step 5 – Determine the BAL
Use the correct FDDI table and match with the appropriate vegetation, slope and distance to determine the BAL.
We'll discuss the possibility of your property needing a BAL assessment in our initial chat and if you book your site inspection your design Consultant will work through this is more detail and let you know if a formal assessment would be required. Design Consultants are working with our expert planning team who have all the knowledge and experience you need to get your building certified or through DA approval.
Knowledge is non-negotiable. Our Design Consultant will measure out your site and help you fully understand the possibilities for your block, and be able to discuss in detail your options for a CDC or Development Application. When you’re planning to build, you want assurance that your site is suitable, and that you are not going to be impacted mid-build by unforeseen or surprise costs. We provide a thorough, free, upfront feasibility study for your Granny Flat which gives you an assured green light to build.